Model 9150 operators are designed to operate vehicular slide gates in
residential, commercial and industrial applications. These operators
are designed so that they can easily be mounted in the front, center or
rear of the gate without any costly and time consuming field
modifications. In addition, the operators can be pad or post mounted
to meet any installation requirements. The 9150 can be equipped with a
factory installed DC Convenience Open option which will automatically
open the gate in the event of a power outage.
*Self-adjusting, no maintenance magnetic limits.
*Partial-open feature.
*Anti-tailgating feature.
*Gate tracker reporting output.
*Ports for plug-in loop detectors.
*DC Powered Convenience Open (Optional).
*Two convenience outlets.
*Fail-safe release (fail-secure optional).
*Programming switches.
*Built-in reset switch.
*Built-in power On/Off switch.
Model 9150-084 with 1/2 HP Motor
*Maximum gate length 30-feet.
*Maximum gate weight 1000 pounds*. (*Assumes gate is on level
ground, in good condition with properly adjusted hardware. Other
external factors may affect the performance of the gate operator. If
DC Convenience Open option is installed, maximum gate weight is 1300
pounds. Other external factors may affect the performance of the gate
operator.)
*1/2 HP continuous-duty motor.
*115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
*Operator is shipped with chain brackets and 20-feet of #40 chain.
*Class I, II, III and IV applications.
*Compliant with UL 325 and 991. ETL listed. (Note: To be
compliant with UL 325 and industry safety guidelines, a secondary
entrapment prevention device(s) is required to be installed with this
gate operator.)
*Dimensions: 15"W x 24"H x 16.5"D
*LIST PRICE: $2,450.00
Model 9150-080 with 1 HP Motor
*Maximum gate length 45-feet.
*Maximum gate weight 1500 pounds*. (*Assumes gate is on level
ground, in good condition with properly adjusted hardware. Other
external factors may affect the performance of the gate operator. If
DC Convenience Open option is installed, maximum gate weight is 1300
pounds. Other external factors may affect the performance of the gate
operator.)
*1 HP continuous-duty motor.
*115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
*Operator is shipped with chain brackets and 20-feet of #40 chain.
*Class I, II, III and IV applications.
*Compliant with UL 325 and 991. ETL listed. (Note: To be
compliant with UL 325 and industry safety guidelines, a secondary
entrapment prevention device(s) is required to be installed with this
gate operator.)
*Dimensions: 15"W x 24"H x 16.5"D
*LIST PRICE: $2,990.00
Options Availiable
DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts).
Surge suppressors.
Product Literature