Bob's Distributing Innovative Access Controls

Call us toll free

800-345-1147

 
   
Categories
All Categories 
Access Control
Slide Gate Operators
Swing Gate Operators
Commerical Door Operators
Garage Door Operators
Barrier Gate Operators
Overhead Gate Operators
Accessories



DoorKing DKS9310 Slide Gate Operator (DKS9310)

DoorKing DKS9310 Slide Gate Operator

DoorKing DKS9310 Slide Gate Operator

The Model 9310 operator is designed to operate vehicular slide gates in residential and commercial applications.   The 9310 is designed so that it can easily be mounted in the front or rear of the gate without any costly and time consuming field modifications.   This operator is designed to be pad mounted.   The 9310 is available in 1/2 or 1 HP versions and can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

*Direct driven manual limits.
*Power Start circuit (1/2 HP only).
*Anti-tailgating feature.
*Gate tracker reporting output.
*Ports for plug-in loop detectors.
*DC Powered convenience open (optional).
*Two convenience outlets.
*Fail-safe release (fail-secure optional).
*Programming switches.
*Built-in reset switch.
*Built-in power On/Off switch.

Model 9310-080 1/2 HP

*Maximum gate length 30-feet.
*Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC *Convenience Open option is installed, maximum gate weight is 800 pounds. Other external factors may affect the performance of the gate operator.)
*10:1 gear reduction running in a continuous oil bath.
*1/2 HP continuous-duty motor.
*115, 208, 230, 460 VAC*. (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
*Operator is shipped with chain brackets and 20-feet of #40 chain.
*Class I, II, III and IV applications.
*Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
*Dimensions: 21.5"W x 27.5"H x 16.5"D
*LIST PRICE: $2,180.00

Model 9310-088 1 HP

*Maximum gate length 45-feet.
*Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
*10:1 gear reduction running in a continuous oil bath.
1 HP continuous-duty motor.
*115, 230 VAC single-phase, 208, 230, 460 VAC three-phase.
*Operator is shipped with chain brackets and 20-feet of #40 chain.
*Class I, II, III and IV applications.
*Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
*Dimensions: 28.5"W x 27.5"H x 16.5"D
*LIST PRICE: $2,650.00

Options Availiable

DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Product Literature



Miscellaneous :
Email a Friend
Product Inquiry
    


Related Products :


 
  Powered by Bob's Distributing, Inc  
Page displayed in: 0.1094 seconds.
 
Products Accessories
Slide Gate Operators Transmitters
Swing Gate Openers Wireless Keypads & Accessories
Barrier Arm Operators Receivers
Overhead Gate Operators Telephone Entry Systems
Residential Garage Door Operators Keypads
Commerical Door Operators  
Bob's Distributor is a meember of the International Door Association Bob's Distrivutor is a member of the American Fence Association